快檢試紙連續貼合平台

LM9000

Continuous Laminator

The LM9000 Continuous Laminating System provides continuous lamination of materials onto a plastic support backing with adhesive.

https://www.biodot.com/product/lm9000-continuous-laminator/

The LM9000 Continuous Laminating System provides continuous lamination of materials onto a plastic support backing with adhesive. Typical applications would be lamination of rapid diagnostic test strips or urine dip sticks. The LM9000 Continuous Laminating System is a modular design to accommodate various numbers and types of materials. Each material is fed from adjustable spindles through guides and under a pressure capstan roller to assure complete adhesion to the plastic support backing. The system provides the ability to individually remove kiss cut adhesive liners for individual laminate materials. For fragile materials like nitrocellulose, alignment is controlled through automated tracking. After lamination the materials can either be cut and stacked in a collection chute or rewound onto a take-up reel. Other process steps such as dispensing, slitting, punching and inspection can also be integrated into the system. For materials that are not available or cannot be processed in roll formats, a magazine feeding system has been designed. Magazines for feeding the plastic support backing as well as more fragile materials are available. The system can also be partially or completely enclosed for control of the manufacturing environment.

Product Features

Roll Feed
- Reel Feed
- Quick-Change Reel Payout Feed

Membrane Payout / 3-up Payout / 1-up and 2-up Cover Layer
- Reel Feed with Pivot Gate Capstan and Press Roller
- Quick-Change Reel Payout Feed
- Adjustable Material Guide

Cutter
- Press Roller
- Adjustable Material Guide

Take-up
- Quick Change Reel Take-up

Note: Material needs to be provided for Proof of Principle Study


Product Specifications

Dimensions (L x W x H)
- 9 in x 22 in x 40in (configuration dependent)

Weight
- approx 476 kg (1047 lbs) (configuration dependent)

Power Requirement
- 110/220 VAC; 50/60 Hz (for all models)

Air Requirement
- Air Supply: 0 – 90 psi
(when AirJets & Capstan are configured)


Material Specifications

Dispensers
- Up to 8 in any combination

Plastic Backing
- Width up to 120 mm
- Reel Core 3.0 in (35 mm), 6.0 in
- Reel OD 18.0 in (460 mm) max

Lamination Webs
- Widths of 13 – 120 mm
- Reel Core: 3.0 in (75 mm)
- Reel OD: 12 in or 16 in max

Membrane Width
- Minimum: 0.20 in (5 mm)*
- Maximum: 4.64 in (118 mm)

*Material dependent